BioDot | BioSensor LM6000 - In-Line Laminating System

LM6000 - In-Line Laminating System

BIOSENSOR

BioDot Home Page

BioSensor Introduction

Dispensing Technologies

Laminating Technologies

Cutting Technologies

“Hands on” Workshops

Products & Options
     Dispensing Systems
       AD1500
       AD3200
       AD6000
       Ordering information
     Laminating Systems
       LM5000
       LM6000
       Ordering information
     Cutting Systems
       CM4000
       RCC4000
       Ordering information
     “Hands on” Workshops
       Ordering Information

Download Catalog (PDF) Format

PRODUCT DESCRIPTION
The LM6000 provides continuous lamination
of materials onto a plastic support backing
with adhesive.

The Automated Laminating system is a
modular design to accommodate various
numbers and types of materials. Each
material is fed from adjustable spindles
through guides and under a pressure roller
to assure complete adhesion to the plastic
support backing. The system provides ability
to individually remove kiss cut adhesive
liners for individual laminate materials. For
fragile materials alignment is controlled
through automated tracking. After lamination
the materials can either be cut and stacked
in a collection chute or rewound onto a take-
up reel.

Other process steps such as dispensing,
slitting, punching and inspection can also be
integrated into the system. For materials that
are not available or cannot be processed in
roll formats a magazine feeding system has
been designed.

The system can also be partially or
completely enclosed for control of the
manufacturing environment.

FEATURES AND BENEFITS
PRECISION AND ACCURACY
        - Sensor and Guides accurately align
          material during lamination.

FLEXIBILITY
        - Various numbers and types of
          materials can be used.

USER-FRIENDLY
        - Microprocessor control with the ease
          of keypad entry.

PERFORMANCE

  Linear Web Speed:
    Up to 4"/sec (100 mm/sec)

  Lamination Roller Pressure:
    0-40 PSIG

  Lamination Tolerance:
    <+/-0.01"(0.25mm)

  Liner Take-up Reel:
    Max OD 8.0" (200 mm)

SPECIFICATIONS
      DIMENSIONS (L X W X H)
            9' x 22' x 40' (configuration dependant)
      WEIGHT
            ~1047 lbs (configuration dependant)
      POWER REQUIREMENT
            110/220 VAC; 50/60 Hz (for all models)
      AIR REQUIREMENT
            Air Supply: 0 - 90 psi (when AirJets & Capstan are configured)

DISPENSING SPECIFICATIONS
      DISPENSERS
            Up to 8 in any combination
      MEMBRANE WIDTH
            Minimum: 0.20" (5 mm) *
            Maximum: 3.85" (98 mm)
            * Material dependant
      LINEAR WEB SPEED
            Up to 4"/sec (100 mm/sec)
      WEB TRACKING
            ± 0.25 mm on take-up roll
            ± 0.25 mm on dispense tracking
      MATERIALS SPECIFICATIONS
      PLASTIC BACKING:
            Width up to 100 mm
            Reel Core 3.0" (35 mm)
            Reel OD 18.0" (460 mm) max
      LAMINATION WEBS: 13-100 MM WIDTH
            Reel Core: 3.0" (75 mm)
            Reel OD: 12" or 16" max

OPTIONS
      DISPENSE MODES
            FrontLine Quanti:
            AirJet Quanti:
            BioJet Quanti:
      CUTTING MODULES
      SLITTING MODULES
      INSPECTION STATIONS
      PUNCHING MODULES
      ENVIRONMENTAL ENCLOSURES

Laminating System
configured with a
Guillotine Cutting
Module

Laminating System configured with a Dispensing Module

Laminating System
configured with a
Dispensing Module