 |
      |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
| PRODUCT
DESCRIPTION The DisPo 1500 is an automated system for transferring small amounts of solid material. The system can work with as little as 50 mg of material, and can transfer masses ranging from 100 ug to 20 mg. The DisPo system is ideal for compound management tasks, where sampling directly from source vials is often desirable, and is also well suited for creating assay samples where studies need to be conducted in the solid state. This is particularly important in pharmaceutical pre-formulation studies. The DisPo system does not rely on vibratory feeding and is therefore not prone to problems encountered in this type of mechanism; namely segregation and biased sampling. As a result, the DisPo system is ideally suited for applications involving heterogenous sample mixtures, where vibratory approaches would be unsuitable. |
| FEATURES AND BENEFITS FOOTPRINT -Small design to accommodate research environment MULTI-MODE DISPENSING - Dispense to vials, microwell plates, or custom destination vessels. |
| PERFORMANCE X-Y Table Speed 100 mm/second X-Y Travel Area 300 x 200 mm Transfer Rate 100 to 200 samples per hour |
DIMENSIONS (W X H X D)
81cm x 61cm x 61cm
WEIGHT
39 kg
POWER REQUIREMENT
110/220 VAC; 50/60 Hz
VACUUM REQUIREMENT
Vacuum Wash Station: 2.1 CFM (~60 CL)
TRANSFER SPECIFICATIONS
MASS RANGE
Variable in the range of 100 µg to 20 mg (with
appropriate probe selection)
MINIMUM SAMPLE MASS
Can transfer from as little as 10 mg of starting
material (compound and target mass dependent)
PRECISION AND ACCURACY
Delivered mass within 10% of target
Reproducibility within < 15& RSD
OPTIONS
INTEGRATED LIQUID DISPENSERS
INTEGRATED BALANCE
INTEGRATED STACKER
HUMIDITY CONTROL
SOURCE/DESTINATION CONTAINERS
Microcentrifuge tubes
Glass vials
Microwell plate
DisPo Probe
Close Up photo of a DisPo1500
|
© 2006 BioDot Inc
Home | BioChip | BioSensor | Lateral Flow | Technologies | Products | Resource Center | News and Events | Contact Us | Site Map |