 |
      |
 |
|
|
|
|
|
|
|
|
|
|
| Cutting Technologies | |
|
|
|
| In-Line Technologies | |
|
|
|
| Laminating Technologies | |
|
|
|
|
Products & Options
|
|
|
|
|
 |
| PRODUCT
DESCRIPTION The Guillotine Cutting module is a resilient, fully automatic system. The standard holddown bar provides high quality cut precision. Additionally, two set screws allow the blade to be easily removed and cleaned without recalibration. Various blade angles are available to optimize cuts. Cut widths and quantities are easily programmed through its Handheld terminal. Programs may be stored for system reference in either development or manufacturing environments. |
| FEATURES AND BENEFITS COST EFFICIENT - Friction Fed Mini Rollers Eliminate Unnecessary Waste of the Master Strip USER FRIENDLY - Simple Handheld Operation - Safety Interlock Device - Easy Blade Cleaning FLEXIBLE - Adjustable Material Guides - Various Blade Speeds |
| PERFORMANCE Cut Accuracy ± 0.25 mm (or 5% cut length) Cutting Speed 240 Maximum Cuts/minute * Cut Width Minimum: 1 mm Maximum: Infinite Material Handling Individual Components Assembled Devices * Faster cycle time is operator dependant |
DIMENSIONS (L x W x H)
36 cm x 43 cm x 25 cm
WEIGHT
24 Kg
POWER REQUIREMENTS
110/220 VAC; 50/60 Hz
0-90 psi Air Pressure (for anti-static option)
MATERIAL REQUIREMENTS
Standard Strip Width: <10 cm
Optional Strip Width: <20 cm
OPERATION
MANUAL CARD FEED
SAFETY INTERLOCK
OPTIONS
BLADE ASSEMBLIES
30, 45, 60
Various compound angles
LEADING EDGE SENSOR
REEL FEED WITH DANCER
REEL FEED WITHOUT DANCER
ACCEPT/REJECT CHUTE
MAGAZINE FEED
ANTI STATIC
CM4000 shown
with cut
sensor cards
|
© 2006 BioDot Inc
Home | BioChip | BioSensor | Lateral Flow | Technologies | Products | Resource Center | News and Events | Contact Us | Site Map |