LM9000 Continuous Laminator

Description

The LM9000 Continuous Laminating System provides continuous lamination of materials onto a plastic support backing with adhesive. Typical applications would be lamination of rapid diagnostic test strips or urine dip sticks.

Learn More

The LM9000 Continuous Laminating System’s modular design accommodates various numbers and types of materials. Each material is fed from adjustable spindles through guides and under a pressure capstan roller to assure complete adhesion to the plastic support backing. The system provides the ability to individually remove kiss cut adhesive liners for individual laminate materials.

For fragile materials like nitrocellulose, alignment is controlled through automated tracking. After lamination, the materials can either be cut and stacked in a collection chute or rewound onto a take-up reel. Other process steps such as dispensing, slitting, punching and inspection can also be integrated into the system.

For materials that are not available or cannot be processed in roll formats, a magazine feeding system for feeding the plastic support backing and more fragile materials is available. The system can also be enclosed for controlling the manufacturing environment.

Product Features

Note: Material needs to be provided for Proof of Principle Study

Roll Feed
  • Reel Feed
  • Quick-Change Reel Payout Feed
Membrane Payout/3-up Payout/1-up and 2-up Cover Layer
  • Reel Feed with Pivot Gate Capstan and Press Roller
  • Quick-Change Reel Payout Feed
  • Adjustable Material Guide
Cutter
  • Press Roller
  • Adjustable Material Guide
Take-up
  • Quick Change Reel Take-up
Typical Applications

Product Specifications

Dimensions (L x W x H)

79 in x 20 in x 34 in (configuration dependent, excludes chassis)

Weight

approx 550 lbs (configuration dependent)

Power Requirement

110/220 VAC; 50/60 Hz

Air Requirement

Air Supply: 0–90 psi

Material Specifications

 

Plastic Backing

Width up to 120 mm
Reel Core 3.0 in (76 mm), 6.0 in (152 mm)
Reel OD 18.0 in (460 mm) max

Lamination Webs

Widths up to 100 mm
Reel Core: 3.0 in (75 mm)
Reel OD: 12 in. or 16 in. max

Membrane Width

Minimum: 0.20 in (5 mm)/Material dependent
Maximum: 4.64 in (118 mm)